Grout is a gap between tiles, thus it’s a good place for dirt to accumulate, especially in rooms with high moisture levels and often exposed to water. When there is already too much dirt accumulating in the grout, the room will not only look dirty, but it will also not be hygienic. So, it’s always a good idea to know how to clean grout and do the chore. However, before you start cleaning the grout in your house, you have to know the following 3 tips to make the job easier.
Use a grout cleaner concentrate
The question is: how to clean grout? Well, the first tip that you can use when cleaning grout is to use a grout cleaner concentrate. You might be a bit surprised here but it’s true that there’s a cleaning product made specifically for cleaning grout. Since it’s made that way, the grout cleaner concentrate is the best cleaning solution that you can get for this kind of chore. This cleaning product can be found in stores selling cleaning products both online and offline, so you shouldn’t have any problem getting your hands on it.
Use a baking soda and vinegar paste
The second tip that you can use when cleaning grout is to use a baking soda and vinegar paste. This tip can be used if you can’t get your hands on a grout cleaner concentrate or don’t have the time to get one. Fortunately, both baking soda and vinegar can be found in almost all houses, so you should also have them in your house. To use them, you can make a paste from the baking soda mixed with water. Then, you can start applying the paste to the grout before spraying the vinegar over the paste to make the reaction needed to lift all dirt from the area. Then, let the mixture sit there for around 10 minutes before scrubbing it with a stiff brush. You will be surprised by how easy the dirt is lifted from the grout.
Scrub with a stiff-bristle brush
Finally, the third tip you can use when cleaning grout is to scrub with a stiff-bristle brush. It’s because besides using the right solution, you also have to use the right tool when cleaning grout, and a stiff-bristle brush is the right one. Of course, if you don’t have any, you can still use a toothbrush to get the job done. To use the brush, you have to scrub the grout that has been covered with the solution. And once the grout has been scrubbed, you only need to rinse it with warm water to finally lift all the dirt on it.
